standard capacitance tvs array 1 05008.r8 6/07 www.protekdevices.com dlz-5 thru dlz-30ca applications ? military & aerospace data line protection ? rs-232 & rs-423 data lines ? microprocessor based equipment ? multiple data & power bus line protection iec compatibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 24a, 8/20s level 2 (line-ground) & level 3 (line-line) features ? mil-std-461 compatible ? protects i/o devices ? satisfies military nemp requirements ? 1300 watts peak pulse power per line (tp=8/20s) ? unidirectional & bidirectional configurations ? esd protection > 40 kilovolts ? internal common ground ? available in multiple voltage types: 5.0v to 30.0v ? multiple tvs array: protects up to 15 lines mechanical characteristics ? ceramic 16 pin hermetically sealed package ? weight 3.2 grams (approximate) ? flammability rating ul 94v-0 ? marking: logo, part number, date code & pin one defined by flag on lead ? screening available upon request - the dlz series can be screened upon request for military requirements in accordance with mil-prf-19500 (applicable test). standard screening is available based on the following options: h1 - 100% screening per test plans 05227 & 05229 h2 - 100% screening per test plans 05228 & 05230 ? screening to desc drawing #94029 (bidirectional) & #94030 (unidirectional) is also available 05008 pin configurations bidirectional
unidirectional 16 pin ceramic
dlz-5 thru dlz-30ca 2 05008.r8 6/07 www.protekdevices.com device characteristics operating temperature symbol v alue -55 to 150 c c -55 to 150 units t l t stg parameter storage temperature peak pulse power (t p = 8/20s) - see figure 1 p pp 1300 watts maximum ratings @ 25c unless otherwise specified forward surge rating (1/20 seconds) - unidirectional only i f 10 amps note 1: part numbers with a ?c? suffix are bidirectional devices, i.e., dlz-8 c. note 2: t clamping (0v to v br min): less than 1x10 -12 seconds (10x10 -9 seconds for bidirectional). part number (see note 1) rated stand-off voltage v wm volts maximum clamping voltage (see fig. 2) @ i p = 1a v c volts maximum clamping voltage (see fig. 2) @8/20s v c @ i pp maximum leakage current @v wm i d a temperature coefficient of v (br) qv (br) mv/c dlz-5 dlz-5a dlz-12 dlz-12a dlz-17 dlz-17a dlz-24 dlz-24a dlz-30 DLZ-30A dlz-8c dlz-13c dlz-13ca dlz-19c dlz-19ca dlz-30c dlz-30ca 5.0 5.0 12.0 12.0 17.0 17.0 24.0 24.0 30.0 30.0 8.0 13.0 13.0 19.0 19.0 30.0 30.0 10.2 9.5 21.1 19.1 30.4 27.5 42.3 38.3 52.8 47.8 13.4 22.8 20.6 34.2 31.0 52.8 47.8 19.2v @ 66a 18.1v @ 70a 33.0v @ 41a 28.0v @ 48a 40.0v @ 33a 37.4v @ 35a 62.4v @ 21a 50.5v @ 26a 62.9v @ 21a 60.0v @ 24a 29.0v @ 45a 34.0v @ 39a 31.0v @ 43a 47.6v @ 28a 40.5v @ 33a 68.7v @ 19a 62.5v @ 21a 200 200 2 2 2 2 2 2 2 2 10 4 4 4 4 4 4 5 5 18 18 20 20 31 31 39 39 9 18 18 24 24 39 39 maximum capacitance 0v @ 1 mhz c pf 880 880 440 440 330 330 275 275 220 220 440 385 385 275 275 165 165 minimum breakdown voltage @ 1ma v (br) volts 6.0 6.0 13.3 13.3 19.2 19.2 26.7 26.7 33.3 33.3 8.5 14.4 14.4 21.6 21.6 33.3 33.3 electrical characteristics per line @ 25c unless otherwise specified
3 05008.r8 6/07 www.protekdevices.com dlz-5 thru dlz-30ca graphs 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 8/20s average power figure 3 power derating curve 0 0 5 10 15 20 25 30 t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 figure 2 pulse wave form 0.1 1 10 100 1,000 10,00 0 t d - pulse duration - s 1300w 8/20s waveform 100 1,000 10,000 100,000 p pp - peak pulse power - watts figure 1 peak pulse power vs pulse time
dlz-5 thru dlz-30ca 4 05008.r8 6/07 www.protekdevices.com 16 pin ceramic package outline & dimensions copyright ? prot ek devices 2007 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the s election or specifications of such products. protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com outline & dimensions: rev 0 - 3/02, 06029 package outline a b c d e f g h i 23.48 12.19 4.87 7.84 - - 2.66 0.57 1.12 0.895 0.450 - 0.310 0.025 ref 0.165 0.095 0.023 0.035 0.925 0.480 0.192 0.290 - ref - 0.105 0.013 0.045 22.72 11.43 - 7.36 - 4.19 2.42 0.33 0.88 dim min max min max millimeters inches dimensions 16 pin ceramic dip notes: 1. dimensions are exclusive of metal burrs and solder protusions. 2. package sealed with ceramic or metal lid.
|
